The SW-S is a MOSFET switch designed to remove the high current load from the standard AEG mechanical switch. ($20.00)
Specifications:
Size = 1 x 0.7 x 0.4 inches
Weight = 3.2 grams
Voltage = 8 to 16 VDC
Peak Current = 160 Amps
RMS Current = 20 Amps
Features:
1. Fully assembled, production tested.
2. Built in heatsink.
3. The MOSFETs are fully protected against voltage spikes from the motor.
4. Fully protected against static discharge.
5. The circuit draws no current when not triggered.
6. The trigger circuit needs considerable current to turn on preventing false firing from condensation, grease, etc.
7. Uses surface mount parts to minimize size.
8. Very tolerant of bad wiring, bad layout, noise, etc.
Documents:
SW-S-Description.pdf
SW-S-Instructions.pdf
Accessories:
Wire
Connectors
ORDERING INFORMATION
For any questions please contact sales@extreme-fire.com
Special Note: These products assume the buyer is able to disassemble and
reassemble the AEG andespecially the mechbox fairly easily. Rewiring and
soldering are needed for installation as well as some electrical and
mechanical skills.
|
