The SW-SF-II is an small non-active braking MOSFET with screw terminal connections. It has a built in 20 or 30 amp thremally resetting fuse. ($40.00)

Specifications:

Size = 1.40 x 0.60 x 0.55 in (36 x 15 x 14 mm) fits 19mm tube

Weight = 10.2g 0.36 Oz

Voltage = 6.5 to 18 VDC

Current = 450 amps peak 20 (30) amps continuous

Features:

Same as SW-SF but with positive terminal connections.

Highest power IRLS3034-7PPbF Main FET.

Safe for up to 14.8 volt LiPO batteries.

Very low trigger switch current (~10mA).

20 (30) amp built in thermal fuse quickly resets once problem is removed.

Screw clamp terminal connections make installation far easier.

Very small and robust. Easily fits in a 0.75 inch ID tube.

Very low trigger switch current (~10mA).

Full 5000W TVS spike and ESD protection.

Uses no power from the battery unless the trigger is pulled.

Documents:

Manual

Fuse trip time chart

SW-SF-Schematic Diagram

Accessories:

Panther Wire Kit $15.00

Wire

Connectors

For any questions please contact    sales@extreme-fire.com

Special Note: These products assume the buyer is able to disassemble and reassemble the AEG andespecially the mechbox fairly easily. Rewiring and soldering are needed for installation as well as some electrical and mechanical skills.