The Extreme-Fire SW-SF is a very high power MOSFET switch with a built in thermally resetting 20A (30A) fuse. ($35.00)
Specifications:
Battery Voltage = 7.0 to 17.0 VDC
Current = 450 amps peak 50 amps continuous (electronics)
Fuse = 20 (30) amps hold - long time lag thermal
Size = 0.60 wide x 0.58 high x 1.10 long inches (15.3 x 14.7 x 28.0 mm)
Weight = 0.27 ounces (7.6 grams)
Features:
Highest power IRLS3034-7PPbF Main FET.
Safe for up to 14.8 volt LiPO batteries.
Very low trigger switch current (~10mA).
20 (30) amp built in thermal fuse quickly resets once problem is removed.
Screw clamp terminal connections make installation far easier.
Very small and robust. Easily fits in a 0.75 inch ID tube.
Very low trigger switch current (~10mA).
Full 5000W TVS spike and ESD protection.
Uses no power from the battery unless the trigger is pulled.
Documents:
Manual
Fuse trip time chart
SW-SF-Schematic Diagram
Accessories:
Wire
Connectors
ORDERING INFORMATION
For any questions please contact sales@extreme-fire.com
Special Note: These products assume the buyer is able to disassemble and
reassemble the AEG andespecially the mechbox fairly easily. Rewiring and
soldering are needed for installation as well as some electrical and
mechanical skills.
|
