SW-Universal Control Module

The SW-Universal Control Module (SW-UCM) is a stand alone computer module that can do computer tasks inside an AEG. It does NOT have a mosfet inside it but it can easily control any MOSFET. It can be easily programmed to do many tasks. ($65.00)

This unit was designed to solve the micro-switch problem. But it was made into a universal controller that can do many other tasks. As supplied, it can be directly wired up with no added programming for micro-switch debouncing.

Specifications:

Battery Voltage = 6 to 18 VDC

Current = ~15 mA base unit

Size = 1.6 x 0.58 x 0.46 inches (41 x 15 x 12 mm)

Weight = 0.26 ounces (7.3 gram)

I/O Input Resistance = 20 kOhm

Drive Current = 100mA

Features:

4 Inputs (A/D or digital) and two high current Outputs.

8MHz ATMEL ATTINY85 RISC processor.

Plenty of program and variable space left open.

All major hardware functions are already programmed. A short C code can change the functions dramatically.

100uS clock for accurate timing.

Hardened to easily withstand the AEG Environment.

Screw clamp terminal connections eliminate many connectors and make installation far easier.

Open source, Public Domain, design and software.

Documents:

Manual

Typical Program Micro-Switch Debouncing

Schematic Diagram

Program disk supplied with unit upon request (too large for download).

Accessories:

Wire

Connectors

For any questions please contact    sales@extreme-fire.com

Special Note: These products assume the buyer is able to disassemble and reassemble the AEG andespecially the mechbox fairly easily. Rewiring and soldering are needed for installation as well as some electrical and mechanical skills.